washers › finishing washers
NAS1169-8
Dimpled Washer
Description
Dimpled Washer
Specifications
| Diameter | #8 |
|---|---|
| Hardness Rating | Between 42.0 rockwell c and 47.0 rockwell c |
| Head Angle | 100 º |
| Head Type | Dimpled |
| Hole Diameter | Between 0.166 inches and 0.196 inches |
| Industry Standards/Certification | NAS1169 |
| Material | Steel |
| Material Document and Classification | MIL-S-7947,COND A MIL SPEC Single Material Response |
| Material Specification | Cond a military specification single material response mil-s-7947 |
| Material Thickness | 0.025 |
| Maximum Hardness Rating | 47.0 Rockwell C |
| Maximum Recess Angle | 103.0 º |
| Minimum Hardness Rating | 42.0 Rockwell C |
| Minimum Recess Angle | 99.0 º |
| NIIN | 00-797-4991 |
| NSN | 5310-00-797-4991 |
| Outside Diameter | Between 0.557 inches and 0.582 inches |
| Overall Height | 0.094 |
| Recess Angle | Between 99.0 degrees and 103.0 degrees |
| Recess Diameter | Between 0.332 inches and 0.342 inches |
| Style Designator | Finishing |
| Surface Treatment | Cadmium |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC Single Treatment Response |
| Surface Treatment Specification | Cl 2 federal specification single treatment response type 2 qq-p-416 |
| Type | Structural |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1169DD8 NAS #10 · 0.582 in · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error