washers › finishing washers
NAS1169-10L
Dimpled Washer
Description
Dimpled Washer
Specifications
| Diameter | #10 |
|---|---|
| Hardness Rating | Between 42.0 rockwell c and 47.0 rockwell c |
| Head Angle | 100 º |
| Head Type | Dimpled |
| Hole Diameter | Between 0.192 inches and 0.222 inches |
| Industry Standards/Certification | NAS1169 |
| Material | Steel |
| Material Specification | Mil-s-7947 military specification single material response |
| Material Thickness | 0.016 |
| NIIN | 00-753-4000 |
| NSN | 5310-00-753-4000 |
| Outside Diameter | Between 0.620 inches and 0.645 inches |
| Overall Height | 0.099 |
| Recess Angle | Between 99.0 degrees and 103.0 degrees |
| Recess Diameter | Between 0.385 inches and 0.395 inches |
| Special Features | No. 10 screw size |
| Specification Data | 80205-nas1169 professional/industrial association standard |
| Style Designator | Finishing |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Cl 2 federal specification single treatment response type 2 qq-p-416 |
| Type | Structural |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1169C10L NAS #12 · 21/32 in
- NAS1169DD10L NAS #12 · 21/32 in · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error