washers › finishing washers
NAS1169-6
Dimpled Washer
Description
Dimpled Washer
Specifications
| Diameter | #6 |
|---|---|
| Head Angle | 100 º |
| Head Type | Dimpled |
| Hole Diameter | Between 0.140 inches and 0.170 inches |
| Industry Standards/Certification | NAS1169 |
| Material | Steel |
| Material Document and Classification | MIL-S-7947,COND 1 OR COND 2 MIL SPEC Single Material Response |
| Material Specification | Cond 1 or cond 2 military specification single material response mil-s-7947 |
| Material Thickness | Between 0.025 inches and 0.028 inches |
| Maximum Recess Angle | 103.0 º |
| Minimum Recess Angle | 99.0 º |
| NIIN | 00-203-1238 |
| NSN | 5310-00-203-1238 |
| Outside Diameter | Between 0.470 inches and 0.495 inches |
| Overall Height | 0.082 |
| Recess Angle | Between 99.0 degrees and 103.0 degrees |
| Recess Diameter | Between 0.279 inches and 0.289 inches |
| Style Designator | Finishing |
| Surface Treatment | Cadmium and chromate |
| Type | Structural |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1169-6. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error