bolts › close tolerance bolts
NAS1154E4P
Close Tolerance Bolt
Description
Fastener Length: 37/64", Thread: 1/4-28, Thread Length: 21/64
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Fastener Length | Between 0.551 inches and 0.581 inches |
| Grip Diameter | Between 0.2485 inches and 0.2495 inches |
| Grip Length | Between 0.240 inches and 0.260 inches |
| Head Diameter | Between 0.449 inches and 0.507 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1154 professional/industrial association standard |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.291 inches and 0.341 inches |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1154E4P. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error