bolts › close tolerance bolts
NAS1154E10
Close Tolerance Bolt
Description
Fastener Length: 61/64", Thread: 1/4-28, Thread Length: 5/16
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.926 inches minimum and 0.956 inches maximum |
| Grip Diameter | 0.2485 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.615 inches minimum and 0.635 inches maximum |
| Head Diameter | 0.449 inches minimum and 0.507 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 61/64 |
| Material | Iron |
| Material Specification | Ams 5737 assn std single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.316 |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1154E10P NAS 1/4-28 · 15/16 in · Flat countersunk · Iron
- NAS1154V10 NAS 1/4-28 · 15/16 in · Flat countersunk · Titanium
- NAS1204-10 NAS 1/4-28 · 15/16 in · Flat countersunk · Steel
- NAS1204-10D NAS 1/4-28 · 15/16 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error