bolts › close tolerance bolts
NAS1154E11
Close Tolerance Bolt
Description
Fastener Length: 63/64", Thread: 1/4-28, Thread Length: 21/64
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Drive Style | Cross |
| Fastener Length | Between 0.989 inches and 1.019 inches |
| Grip Diameter | Between 0.2485 inches and 0.2495 inches |
| Grip Length | Between 0.678 inches and 0.698 inches |
| Head Diameter | Between 0.497 inches and 0.507 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Material | Iron |
| Material Specification | Ams 5737 assn standard single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Specification Data | 80205-nas1154 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.291 inches and 0.341 inches |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series | UNJF |
| Thread Series Designator | Unjf (fine thread with external controlled root radius) |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1204-11 NAS 1/4-28 · 1 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error