rivets › solid rivets
MS20426D6-11
(1 Pound)
Description
Length: 3/4", roughly 485 pieces per pound, MS20426 series rivet
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.678 inches minimum and 0.698 inches maximum |
| Head Major Diameter | 0.349 inches minimum and 0.357 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430,t4 fed spec single material response |
| Shank Diameter | 0.186 inches minimum and 0.190 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 33000 single pounds per square inch |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
| Weight | 1 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1199-6-11 NAS 11/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- MS20427M6-11 MS 11/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error