rivets › solid rivets
MS20426D6-18
Military Standard Solid Rivet
Description
Fastener Length: 1-1/8"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 1.115 inches minimum and 1.135 inches maximum |
| Grip Length | 0.834 inches minimum and 0.854 inches maximum |
| Head Major Diameter | 0.349 inches minimum and 0.357 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.186 inches minimum and 0.190 inches maximum |
| Shank Style | Straight |
| Shear Strength | 33000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426AD6-18 MS 1-1/8 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426B6-18 MS 1-1/8 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426DD6-18 MS 1-1/8 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error