rivets › solid rivets
MS20427M6-11
Military Standard Rivet
Description
Fastener Length: 3/4"
Specifications
| Countersink Angle | 98.5 degrees minimum and 101.5 degrees maximum |
|---|---|
| Fastener Length | 0.678 inches minimum and 0.698 inches maximum |
| Head Major Diameter | 0.323 inches minimum and 0.365 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | Annealed |
| Material | Nickel |
| Min. Tensile Strength (psi) | 70000 pounds per square inch |
| Shank Diameter | 0.186 inches minimum and 0.190 inches maximum |
| Shank Style | Straight |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1199-6-11 NAS 11/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- MS20426D6-11 MS 11/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error