bolts › close tolerance bolts
NAS333CP5
Bolt
Description
Fastener Length: 41/64", Thread: 10-32, Thread Length: 13/32"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.517 inches nominal first hole |
| Fastener Length | 0.641 inches minimum and 0.687 inches maximum |
| Grip Diameter | 0.1886 |
| Grip Length | 0.250 |
| Head Diameter | 0.376 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type ii |
| Length | 11/16 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-8844 mil spec 2nd material response or ams6414 assn std 2nd material response or mil-s-6049 mil spec 3rd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.070 inches nominal first hole |
| Single Shear Strength | 2620 pounds per square inch |
| Specification Data | 80205-nas333 professional/industrial association standard |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416,typ ii,cls 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.406 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS333CP5. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error