bolts › close tolerance bolts
NAS333CP4
Close Tolerance Bolt
Description
Fastener Length: 1/2", Thread: 10-32, Thread Length: 3/8
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.382 inches first hole and 0.402 inches first hole |
| Fastener Length | 0.562 |
| Grip Diameter | Between 0.1885 inches and 0.1894 inches |
| Grip Length | Between 0.115 inches and 0.135 inches |
| Hardness Rating | 36.0 rockwell c and 40.0 rockwell c |
| Head Diameter | Between 0.376 inches and 0.385 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 1/2 |
| Material | Steel |
| Material Specification | Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.070 inches first hole |
| Specification Data | 80205-nas333 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 type 2 cl 3 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.380 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS333CP4. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error