screws › close tolerance screws
NAS2803-8
Screw
Description
Fastener Length: 27/32", Thread: 10-32, Thread Length: 1/4"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.823 inches minimum and 0.853 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.490 inches minimum and 0.510 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.328 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 27/32 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-8503 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6049 mil spec 5th material response |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Specification Data | 80205-nas2803 professional/industrial association standard |
| Surface Finish | 32.0 microinches bearing surface of head, 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Nas 672 assn std single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.276 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS2803-2
- NAS2803-3
- NAS2803-4
- NAS2803-6
- NAS2803-8
- NAS2803-14
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS2803-8. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error