screws › close tolerance screws
NAS2803-14
Screw
Description
Fastener Length: 1-7/32", Thread: 10-32, Thread Length: 23/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.198 inches minimum and 1.228 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 1.865 inches minimum and 1.885 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 40.0 rockwell c maximum |
| Head Diameter | 0.328 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 1 7/32 |
| Material | Steel |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Specification Data | 80205-nas2803 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Nas672 assn std single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.313 inches minimum and 0.363 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS2803-14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error