rivets › blind rivets
NAS1921B06S07
Rivet
Description
Fastener Length: 39/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.600 |
| Grip Length | 0.376 inches minimum and 0.437 inches maximum |
| Head Major Diameter | 0.349 inches minimum and 0.357 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response locking ring, Qq-a-430 fed spec single material response sleeve, Qq-a-430 fed spec single material response stem |
| Shank Diameter | 0.186 inches minimum and 0.190 inches maximum |
| Shank Style | Self-plugging mechanically locked stem |
| Special Features | For use with single action hand held or automated inst tools,color code yellow on spindle |
| Specification Data | 80205-nas1921 professional/industrial association specification |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response stem or mil-c-5541 mil spec 2nd treatment response stem |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- CR2662-6-7 Cherry 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
- NAS1399D6A7 NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- NAS1921B06-07P NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- NAS1921C06S07 NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- NAS1921M06S07 NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error