rivets › blind rivets
NAS1399D6A7
Cr Lock Rivet
Description
Fastener Length: 19/32"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.600 inches maximum |
| Grip Length | 0.376 inches minimum and 0.437 inches maximum |
| Head Major Diameter | 0.349 inches minimum and 0.357 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | H-38 strain hardened locking ring |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response locking ring |
| Shank Diameter | 0.186 inches minimum and 0.190 inches maximum |
| Shank Style | Self-plugging mechanically locked stem |
| Specification Data | 80205-nas1399 professional/industrial association standard |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response sleeve or mil-c-5541 mil spec 2nd treatment response sleeve, Mil-a-8625 mil spec 1st treatment response stem or mil-c-5541 mil spec 2nd treatment response stem |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1399D6A3
- NAS1399D6A4
- NAS1399D6A5
- NAS1399D6A6
- NAS1399D6A7
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- CR2662-6-7 Cherry 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
- NAS1921B06-07P NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- NAS1921B06S07 NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- NAS1921C06S07 NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- NAS1921M06S07 NAS 19/32 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error