screws › close tolerance screws
NAS1580A3T5
Close Tolerance Screw
Description
Flush Reduced Head Bolt
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.660 inches minimum and 0.680 inches maximum |
| Finish | Cadmium Per Ams QQ-P-416 TYPE II |
| Grip | 0.312 |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.302 inches minimum and 0.322 inches maximum |
| Head Diameter | 0.339 inches minimum and 0.381 inches maximum |
| Head Style | Flat countersunk |
| Heat Treat | 160,000 - 180,000 PSI |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 0.675, 43/64 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| NIIN | 01-056-3198 |
| NSN | 5305-01-056-3198 |
| Specification Data | 80205-nas1580 professional/industrial association standard |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416, type 2, class 2 fed spec all treatment responses |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.292 inches minimum and 0.363 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1580A3T5. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error