screws › close tolerance screws
NAS1580A3T17Y
Close Tolerance Screw
Description
Fastener Length: 1-7/16", Thread: 10-32, Thread Length: 23/64
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.410 inches minimum and 1.440 inches maximum |
| Grip Diameter | 0.2197 inches minimum and 0.2207 inches maximum |
| Grip Length | 1.052 inches minimum and 1.072 inches maximum |
| Head Diameter | 0.3813 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 1 7/16 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-6049 mil spec 3rd material response |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416, type 2 class 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.1900 |
| Thread Direction | Right-hand |
| Thread Length | 0.363 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1580A3T17Y. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error