nuts › plain hexagon nuts
NAS1423-7
Drilled Hex Nut
Description
Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-38 HRC
Specifications
| Bearing Surface Finish | 250.0 microinches |
|---|---|
| Bearing Surface Type | Chamfered or washer faced |
| Countersink Angle | 110.0 degrees nut |
| Drilled Hole Diameter | 0.046 |
| Hardness Rating | Between 34.0 rockwell c and 38.0 rockwell c |
| Hole Configuration Style | Configuration b |
| Hole Type And Quantity | 3 drilled |
| Material | Steel |
| Material Specification | Mil-s-6758 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-5000 military specification 3rd material response |
| Nut Height | Between 0.146 inches and 0.166 inches |
| Nut Style | Hexagon |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Cl 3 federal specification single treatment response type 2 qq-p-416 |
| Thread Class | 3b |
| Thread Dash | RH-7 |
| Thread Direction | Right-hand |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series | Unf (fine thread) |
| Thread Size | 0.438, 7/16-20 UNJF-3B |
| Width Across Flats | Between 0.615 inches and 0.627 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1423-7LH NAS 7/16-20 · Steel
- NAS1423C7 NAS 7/16-20 · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error