nuts › plain hexagon nuts
NAS1423-6
Drilled Jam Nut
Description
Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-38 HRC
Specifications
| Bearing Surface Finish | 250.0 microinches |
|---|---|
| Bearing Surface Type | Chamfered or washer faced |
| Countersink Angle | 110.0 degrees nut |
| Dimension A | 0.563 in |
| Dimension B | 0.060 in |
| Dimension C | 0.628 in |
| Dimension D | 0.125 in |
| Drilled Hole Diameter | 0.046 |
| Hardness Rating | Between 34.0 rockwell c and 38.0 rockwell c |
| Hole Configuration Style | Configuration b |
| Hole Type And Quantity | 3 drilled |
| Industry Standards/Certification | NAS1423 |
| Material | Steel |
| Material Specification | Mil-s-6758 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-5000 military specification 3rd material response |
| Nut Height | Between 0.115 inches and 0.135 inches |
| Nut Style | Hexagon |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Cl 3 federal specification single treatment response type 2 qq-p-416 |
| Thread Class | 3b |
| Thread Dash | RH-6 |
| Thread Direction | Right-hand |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series | Unf (fine thread) |
| Thread Size | 0.375, 3/8-24 UNJF-3B |
| Thread T | 0.3750-24 |
| Type | Drilled Jam |
| Weight | .005 lb |
| Width Across Flats | Between 0.553 inches and 0.565 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1423-6LH NAS 3/8-24 · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error