screws › machine screws
MS35273-27
Drilled Fillister Head Machine Screw
Description
Fastener Length: 9/32", Hole Diameter: 3/64", Thread: 6-32, Thread Length: 1/4"
Specifications
| Fastener Length | 0.281 inches minimum and 0.312 inches maximum |
|---|---|
| Finish | Black Oxide |
| Head Diameter | 0.208 inches minimum and 0.226 inches maximum |
| Head Height | 0.089 inches minimum and 0.096 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 5/16 |
| Material | Brass |
| Min. Tensile Strength (psi) | 57000 pounds per square inch |
| Screw Material | Copper alloy |
| Screw Material Specification | Qq-b-626 fed spec single material response or qq-w-321 fed spec single material response |
| Size | 6-32 |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | 0.250 inches minimum and 0.312 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 6 |
| Thread Type | N.C. - Coarse |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35265-27 MS #6-32 · 5/16 in · Drilled Fillister Head · Steel
- MS35275-227 MS #6-32 · 5/16 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error