screws › machine screws
MS35265-27
6-32X5/16 MS35265 Military Drilled Slotted Fillister MS Screw Coarse Thread
Description
MS 35265-27 Drilled Fillister Head Machine Screw
Specifications
| Alternate Part Number | A500A6-5 |
|---|---|
| Country of Origin | USA |
| Drilling | Drilled Head |
| Drive | Slotted |
| Drive Style | Slotted |
| Fastener Length | 0.281 inches minimum and 0.312 inches maximum |
| Finish | Cadmium Plate, Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | 0.208 inches minimum and 0.226 inches maximum |
| Head Height | 0.089 inches minimum and 0.096 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | MS35265 |
| Internal Drive Style | Slot |
| Length | 5/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-543-2394 |
| NSN | 5305-00-543-2394 |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 fed spec single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec single treatment response |
| Size | 6-32 |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | 0.250 inches minimum and 0.312 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 6-32 |
| Thread Type | N.C. - Coarse |
| Weight | 0.0002 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35273-27 MS #6-32 · 5/16 in · Drilled Fillister Head · Brass
- MS35275-227 MS #6-32 · 5/16 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error