screws › socket head cap screws
MS24677-10
3/4 Inch Length MS24677 Drilled Socket Head Machine Screw
Description
Fastener Length: 39/64", Hole Diameter: 3/64", Thread: 6-32, Head Width: 7/64", Thread Length: 15/32
Specifications
| Alternate Part Number | NAS1352-06H12P |
|---|---|
| Country of Origin | USA |
| Drilling | Drilled Head |
| Fastener Length | 0.595 inches minimum and 0.625 inches maximum, 0.595 inches minimum and 0.750 inches maximum |
| Finish | Plain |
| Hardness Rating | 36.0 rockwell c minimum and 43.0 rockwell c maximum |
| Head Diameter | 0.218 inches minimum and 0.226 inches maximum |
| Head Height | 0.134 inches minimum and 0.138 inches maximum |
| Head Style | Flat chamfer |
| Head Type | Socket |
| Hole Configuration Style | Round |
| Hole Diameter | 0.033 |
| Hole Quantity | 2 |
| Hole Type | Drilled |
| Industry Standards/Certification | MS24677 |
| Internal Drive Style | Hexagon |
| Length | 3/4 |
| Material | Steel |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Minimum Yield Strength | 130000 pounds per square inch |
| Size | 6-32 |
| Sold In | Per Package |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | 0.466 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 0.1380-32, 6 |
| Thread Type | N.C. - Coarse |
| Weight | .005 lb |
| Width Across Flats | 0.109 inches minimum and 0.111 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS24677-10 — functionally equivalent.
- NAS1352-06H12P Listed alternate #6-32 · 25/32 in · Flat chamfer · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error