screws › socket head cap screws
MS24674-35
Hexagon Socket Drilled Cap Screw
Description
Fastener Length: 7/8", Hole Diameter: ", Thread: 1/4-18, Head Width: 1/4", Thread Length: 7/8"
Specifications
| Fastener Length | 0.875 |
|---|---|
| Finish | Passivate |
| Hardness Rating | 80.0 rockwell b minimum |
| Head Diameter | 0.457 inches minimum and 0.468 inches maximum |
| Head Height | 0.306 inches minimum and 0.312 inches maximum |
| Head Style | Flat chamfer |
| Hole Configuration Style | Round internal hexagon |
| Hole Diameter | 0.062 |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Internal Drive Style | Hexagon |
| Length | 7/8 |
| Material | CRES |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Minimum Yield Strength | 30000 pounds per square inch |
| Size | 5/16-18 |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.875 inches minimum |
| Thread Qty | 18 |
| Thread Qty Per Inch (tpi) | 18 |
| Thread Series Designator | UNC |
| Thread Size | 1/4 |
| Thread Type | N.C. - Coarse |
| Width Across Flats | 0.250 inches minimum and 0.253 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS24674-35. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error