screws › socket head cap screws
MS24674-17
Hexagon Socket Drilled Cap Screw
Description
Fastener Length: 7/8", Hole Diameter: 3/64", Thread: 10-24, Head Width: 5/32", Thread Length: 7/8"
Specifications
| Fastener Length | 0.875 |
|---|---|
| Finish | Passivate |
| Hardness Rating | 80.0 rockwell b minimum |
| Head Diameter | 0.303 inches minimum and 0.312 inches maximum |
| Head Height | 0.185 inches minimum and 0.190 inches maximum |
| Head Style | Flat chamfer |
| Hole Configuration Style | Round |
| Hole Diameter | 0.050 |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Internal Drive Style | Hexagon |
| Length | 7/8 |
| Material | CRES |
| Material Specification | 66 fed std all material responses |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Minimum Yield Strength | 30000 pounds per square inch |
| Size | 10-24 |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.875 inches minimum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNC |
| Thread Size | 10 |
| Thread Type | N.C. - Coarse |
| Width Across Flats | 0.156 inches minimum and 0.159 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1352-3H14P NAS #10-24 · 7/8 in · Flat chamfer · Steel
- NAS1352C3H14 NAS #10-24 · 7/8 in · Flat chamfer · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error