screws › machine screws
MS24673-5
Hexagon Socket Drilled Cap Screw
Description
Fastener Length: 7/8", Hole Diameter: 3/64", Thread: 10-32, Head Width: 5/32", Thread Length: 53/64", drilled head, MS24673 series screw
Specifications
| Fastener Length | 0.875 |
|---|---|
| Finish | Passivate |
| Hardness Rating | 80 rockwell b |
| Head Diameter | Between 0.303 inches and 0.312 inches |
| Head Height | Between 0.185 inches and 0.19 inches |
| Head Style | Flat chamfer |
| Hole Configuration Style | Round longitudinal hole |
| Hole Diameter | 0.047 |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Internal Drive Style | Hexagon |
| Length | 7/8 |
| Material | CRES |
| Material Specification | 66 federal standard all material responses |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Minimum Yield Strength | 30000 pounds per square inch |
| Size | 10-32 |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.829 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
| Thread Type | N.F. - Fine |
| Width Across Flats | Between 0.156 inches and 0.159 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1351C3H14 NAS #10-32 · 7/8 in · Flat chamfer · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error