screws › machine screws
MS24673-2
1/2 Inch Length MS24673 Drilled Socket Head Machine Screw
Description
Fastener Length: 1/2", Hole Diameter: 1/32", Thread: 10-32, Head Width: 5/32", Thread Length: 29/64
Specifications
| Alternate Part Number | NAS1351-C3-8 |
|---|---|
| Country of Origin | USA |
| Drilling | Drilled Head |
| Fastener Length | 0.500 |
| Finish | Passivate |
| Hardness Rating | 80.0 rockwell b minimum |
| Head Diameter | 0.303 inches minimum and 0.312 inches maximum |
| Head Height | 0.185 inches minimum and 0.190 inches maximum |
| Head Style | Flat chamfer |
| Head Type | Socket |
| Hole Configuration Style | Round longitudinal hole |
| Hole Diameter | 0.044 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Industry Standards/Certification | MS24673 |
| Internal Drive Style | Hexagon |
| Length | 1/2 |
| Material | CRES |
| Material Specification | 66 fed std all material responses |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Minimum Yield Strength | 30000 pounds per square inch |
| Size | 10-32 |
| Sold In | Per Package |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.454 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 0.1900-32, 10 |
| Thread Type | N.F. - Fine |
| Weight | .005 lb |
| Width Across Flats | 0.156 inches minimum and 0.159 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS24673-2 — functionally equivalent.
- NAS1351C3-8 Listed alternate 1/2 in · Flat chamfer · Steel
- NAS1351C3H10 Listed alternate #10-32 · 0.641 in · Flat chamfer · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error