rivets › solid rivets
MS20427M3C7
Military Standard Solid Rivet
Description
Fastener Length: 7/16
Specifications
| Countersink Angle | 98.5 degrees minimum and 101.5 degrees maximum |
|---|---|
| Fastener Length | 0.427 inches minimum and 0.447 inches maximum |
| Head Major Diameter | 0.155 inches minimum and 0.190 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Nickel |
| Material Specification | Qq-n-281 fed spec single material response |
| Shank Diameter | 0.093 inches minimum and 0.097 inches maximum |
| Shank Style | Straight |
| Shear Strength | 49000 single pounds per square inch |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- BACR15BA3AD7C BAC 29/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- BACR15BA3D7C BAC 29/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- BACR15DP3AD7 BAC 29/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426AD3-7A MS 29/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error