rivets › solid rivets
MS20427M3C4
Military Standard Solid Rivet
Description
Fastener Length: 1/4, roughly 1500 pieces per pound
Specifications
| Countersink Angle | 98.5 degrees minimum and 101.5 degrees maximum |
|---|---|
| Fastener Length | 0.240 inches minimum and 0.260 inches maximum |
| Head Major Diameter | 0.155 inches minimum and 0.190 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | T-3 solution heat treated |
| Material | Nickel |
| Material Specification | Qq-n-281 fed spec single material response |
| Shank Diameter | 0.093 inches minimum and 0.097 inches maximum |
| Shank Style | Straight |
| Shear Strength | 49000 single pounds per square inch |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- KB11155 Other 0.260 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Steel
- NAS1199-3-4 NAS 0.260 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- MS20426AD3-4A MS 0.260 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error