rivets › solid rivets
MS20426AD5-7
Military Standard Solid Rivet
Description
Length: 7/16", diameter: 5/32", countersunk precision head, aluminum alloy, roughly 1070 pieces per pound, MS20426 series rivet
Specifications
| Countersink Angle | Between 99.5 degrees and 100.5 degrees |
|---|---|
| Fastener Length | Between 0.428 inches and 0.448 inches |
| Grip Length | 0.194 mils and 0.214 centimeters |
| Head Major Diameter | Between 0.282 inches and 0.290 inches |
| Head Style | Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 federal specification single material response |
| Rivet Type | Solid |
| Shank Diameter | Between 0.155 inches and 0.159 inches |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response |
| Weight | 1 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20426AD5-2
- MS20426AD5-3
- MS20426AD5-4
- MS20426AD5-5
- MS20426AD5-5A
- MS20426AD5-6
- MS20426AD5-7
- MS20426AD5-8
- MS20426AD5-9
- MS20426AD5-10
- MS20426AD5-11
- MS20426AD5-12
- MS20426AD5-13
- MS20426AD5-14
- MS20426AD5-15
- MS20426AD5-16
- MS20426AD5-18
- MS20426AD5-20
- MS20426AD5-22
- MS20426AD5-24
- MS20426AD5-26
- MS20426AD5-28
- MS20426AD5-32
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426B5-7 MS 29/64 in · Aluminum
- MS20426D5-7 MS 29/64 in · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error