rivets › solid rivets
MS20426AD5-26
Military Standard Solid Rivet
Description
Fastener Length: 1-5/8"
Specifications
| Chamfer Length | 0.039 |
|---|---|
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
| Fastener Length | 1.615 inches minimum and 1.635 inches maximum |
| Grip Length | 1.381 inches minimum and 1.401 inches maximum |
| Head Height | 0.055 |
| Head Major Diameter | 0.282 inches minimum and 0.290 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | T-4 solution heat treated |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.155 inches minimum and 0.159 inches maximum |
| Shank Style | Straight with tapered tip |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20426AD5-2
- MS20426AD5-3
- MS20426AD5-4
- MS20426AD5-5
- MS20426AD5-5A
- MS20426AD5-6
- MS20426AD5-7
- MS20426AD5-8
- MS20426AD5-9
- MS20426AD5-10
- MS20426AD5-11
- MS20426AD5-12
- MS20426AD5-13
- MS20426AD5-14
- MS20426AD5-15
- MS20426AD5-16
- MS20426AD5-18
- MS20426AD5-20
- MS20426AD5-22
- MS20426AD5-24
- MS20426AD5-26
- MS20426AD5-28
- MS20426AD5-32
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS20426AD5-26. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error