rivets › pin-rivets
HL329-6-7
Hi-Lok™Rivet
Description
Fastener Length: 49/64", Thread Size: 3/16"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 0.753 inches minimum and 0.773 inches maximum |
| Grip Length | 0.438 inches maximum |
| Head Major Diameter | 0.3016 inches maximum |
| Head Style | Flush countersunk |
| Lubrication | Cetyl alcohol, spec 305, hi-shear corp |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec 1st material response or mil-s-5626 mil spec 2nd material response or mil-s-6049 mil spec 3rd material response |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Shank Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Shank Style | Pin-rivet, straight, threaded |
| Shear Strength | 108000 single pounds per square inch |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416,type 2,class 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 0.190 |
| Width Between Flats | 0.0791 inches minimum and 0.0806 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- HL41-6-7 Hi-Lok #10-32 · 25/32 in · Flush countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error