rivets › pin-rivets
HL329-6-11
Hi-Lok™Rivet
Description
Thread Size: 1/4"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 1.003 inches minimum and 1.023 inches maximum |
| Grip Length | 0.693 inches maximum |
| Head Major Diameter | 0.297 inches minimum and 0.302 inches maximum |
| Head Style | Flush countersunk |
| Material | Steel |
| Material Specification | Mil-s-6049 mil spec 1st material response or mil-s-5000 mil spec 2nd material response |
| Min. Tensile Strength (psi) | 180000 pounds per square inch |
| Shank Diameter | 0.188 inches minimum and 0.190 inches maximum |
| Shank Style | Pin-rivet, straight, threaded |
| Shear Strength | 108000 single pounds per square inch |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 0.190 |
| Width Between Flats | 0.079 inches minimum and 0.081 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- HL11V6-11 Hi-Lok #10-32 · 1.02 in · Flush countersunk · Titanium
- HL19PB6-11 Hi-Lok #10-32 · 1.02 in · Flush countersunk · Steel
- HL41-6-11 Hi-Lok #10-32 · 1.02 in · Flush countersunk · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error