washers › flat washers
AN961-816T
Aeronautical Standard Washer
Description
AN 961-816T Flat Washer
Specifications
| Finish | Tin |
|---|---|
| Hole Diameter | 0.505 inches minimum and 0.525 inches maximum |
| Material | Brass |
| Material Specification | Qq-w-321 1/2 hard fed spec 1st material response or qq-b-626 1/2 hard fed spec 2nd material response |
| Nominal I.D. | .515 |
| Nominal O.D. | .875 |
| Overall Diameter | 0.870 inches minimum and 0.895 inches maximum |
| Screw Size | 1/2 |
| Surface Treatment | Tin plated |
| Surface Treatment Specification | Mil-t-10727 ty 1 mil spec single treatment response |
| Thickness | .064, 0.054 inches minimum and 0.074 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN961-816T. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error