washers › flat washers
AN961-10S
Aeronautical Standard Flat Washer
Description
AN 961-10S Flat Washer
Specifications
| Finish | Silver |
|---|---|
| Hole Diameter | 0.193 inches minimum and 0.213 inches maximum |
| Material | Brass |
| Material Specification | Qq-b-626 1/2 hard fed spec 1st material response or qq-w-321 1/2 hard fed spec 2nd material response |
| Nominal I.D. | .203 |
| Nominal O.D. | .438 |
| Overall Diameter | 0.433 inches minimum and 0.458 inches maximum |
| Precious Material | Silver |
| Precious Material And Location | Over silver |
| Screw Size | 10 |
| Surface Treatment | Silver plated |
| Surface Treatment Specification | Qq-s-365 fed spec single treatment response |
| Thickness | .032, 0.022 inches minimum and 0.042 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1149C0363B NAS #12 · 29/64 in · CRES
- AN960XC10 AN #12 · 29/64 in · CRES
- AN961-10T AN #12 · 29/64 in · Brass
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error