fittings › boss nipples
AN911-2J
Aeronautical Standard Pipe Nipple
Description
Nipple, Pipe
Specifications
| Alternate Part Number | AS4860J02 |
|---|---|
| Angle | 30 º |
| Angle Tolerance | ±5 º |
| Connection Style | Plain (pipe) all ends |
| Connection Type | Threaded external pipe all ends |
| Diameter K | 0.279 in |
| Diameter K Tolerance | +0.004 in |
| Dimension B | 1 7/16 in |
| Dimension B Tolerance | ±1/32 in |
| Dimension C | 0.625 in |
| Dimension C Tolerance | +0.004 in |
| Dimension L | 25/64 in |
| Industry Standards/Certification | AN911 |
| Leg Length | 0.469 inches all ends |
| Material | CRES |
| Material Specification | 66 assn standard single material response |
| Maximum Operating Pressure | 3000.0 pounds per square inch single response |
| Maximum Operating Temp | -65.0 degrees fahrenheit 2nd response, 225.0 degrees fahrenheit 1st response |
| Media For Which Designed | Air 2nd response, Hydraulic fluid 1st response, Water-oil-gas 3rd response |
| NIIN | 00-698-4042 |
| NSN | 4730-00-698-4042 |
| Nominallength | 1.438 |
| Special Features | Supports grumman a10a aircraft |
| Specification Data | 88044-an911 government standard and 81349-mil-f-5509 government specification |
| Style Designator | Center wrenching facility |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Type 1 federal specification single treatment response qq-p-35 |
| Thread P (ANPT) | 1/4 |
| Thread Series Designator | Anpt all ends |
| Thread Size | 0.250 inches all ends |
| Thread Type | Aeronautical National Pipe Thread |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN911-2J — functionally equivalent.
- AS4860J02 Listed alternate 1/4 in · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error