fittings › boss nipples
AN911-1J
Aeronautical Standard Pipe Nipple
Description
Nipple, Pipe
Specifications
| Alternate Part Number | AS4860J01 |
|---|---|
| Angle | 30 º |
| Angle Tolerance | ±5 º |
| Connection Style | Plain (pipe) all ends |
| Connection Type | Threaded external pipe all ends |
| Diameter K | 0.203 in |
| Diameter K Tolerance | +0.003 in |
| Dimension B | 31/32 in |
| Dimension B Tolerance | ±1/32 in |
| Dimension C | 0.438 in |
| Dimension C Tolerance | +0.003 in |
| Dimension L | 25/64 in |
| Industry Standards/Certification | AN911 |
| Material | CRES |
| NIIN | 00-595-3875 |
| NSN | 4730-00-595-3875 |
| Nominallength | 0.969 |
| Specification Data | 88044-an911 government standard |
| Style Designator | Center wrenching facility |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Type 1 federal specification single treatment response qq-p-35 |
| Thread P (ANPT) | 1/8 |
| Thread Series Designator | Anpt all ends |
| Thread Size | 0.125 inches all ends |
| Thread Type | Aeronautical National Pipe Thread |
| Weight | 0.025 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN911-1J — functionally equivalent.
- AS4860J01 Listed alternate #5 · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error