clamps › loop clamps
AN742-3
Aeronautical Standard Loop Clamp
Description
Loop Clamp
Specifications
| Center To Center Distance Between Loop And Mounting Hole | 0.423 |
|---|---|
| Description | Clamps, Plain AN742-3 Steel |
| Diameter | 0.204 |
| Distance From Loop Center To Tongue End | 0.611 |
| Finish | Plain |
| Industry Standards/Certification | AN742 |
| Loop Inside Diameter | 0.173 inches minimum and 0.203 inches maximum |
| Material | Steel |
| Material Specification | Qq-s-698 fed spec 1st material response band |
| Material Thickness | 0.0285 inches minimum and 0.0355 inches maximum |
| NIIN | 00-598-0279 |
| NSN | 5340-00-598-0279 |
| Overall Width | 0.375 |
| Size | 3/16-Inch |
| Style Designator | Single loop |
| Surface Treatment | Cadmium |
| To Fit Diameter | 3/16 in |
| Tongue Hole Type | Round, unthreaded |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN742-3. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error