clamps › loop clamps
AN742-2
1/8 Inch To Fit Diameter AN742 Plain Cable Clamp
Description
1/8 Inch To Fit Diameter AN742 Plain Cable Clamp
Specifications
| Center To Center Distance Between Loop And Mounting Hole | 0.360 |
|---|---|
| Diameter | 0.199 inches minimum and 0.209 inches maximum |
| Distance From Loop Center To Tongue End | 0.548 |
| Finish | Plain |
| Industry Standards/Certification | AN742 |
| Loop Inside Diameter | 0.115 inches minimum and 0.135 inches maximum |
| Material | Steel |
| Material Specification | Astm a109,t4 assn std single material response |
| Material Thickness | 0.0285 inches minimum and 0.0355 inches maximum |
| Overall Width | 0.375 |
| Style Designator | Single loop |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 2 fed spec single treatment response |
| To Fit Diameter | 1/8 in |
| Tongue Hole Type | Round, unthreaded |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN742-2. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error