screws › machine screws
AN507-832R44
Aeronautical Standard Screw
Description
Fastener Length: 2-3/4", Thread: 8-32, Thread Length: 1-3/4"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 2.750 |
| Head Diameter | 0.300 inches minimum and 0.332 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 2 3/4 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Screw Material | Steel or steel comp 1010 |
| Screw Material Specification | Qq-s-630 fed spec 2nd material response or qq-s-631 fed spec 2nd material response or qq-s-634 fed spec 2nd material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 3 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 1.750 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 8 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24693-S64 MS #8-32 · 0.086 in · Flat countersunk · Steel
- MS24693S64 MS #8-32 · 0.086 in · Flat countersunk · Steel
- MS24693S66 MS #8-32 · 0.086 in · Flat countersunk · Steel
- NAS1102-08-47 NAS #8-32 · 0.086 in · Flat countersunk · Steel
- NAS514P832-40 NAS #8-32 · 0.086 in · Flat countersunk · Steel
- AN505C8R34 AN #8-32 · 0.086 in · Flat countersunk · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error