screws › machine screws
AN505C8R34
Aeronautical Standard Screw
Description
Fastener Length: 2-1/32", Thread: 8-32, Thread Length: 1-3/4"
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Fastener Length | 2.031 inches minimum and 2.125 inches maximum |
| Head Diameter | 0.300 inches minimum and 0.332 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 2 1/8 |
| Material | CRES |
| Nondefinitive Specification/Std Data | Iii type and 2c style |
| Screw Material | Steel corrosion resisting |
| Screw Material Specification | Qq-s-763,series 400 fed spec single material response or mil-s-7720,comp fm or g mil spec single material response |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 1.750 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 8 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN505C8R9
- AN505C8R30
- AN505C8R34
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24693-S64 MS #8-32 · 0.086 in · Flat countersunk · Steel
- MS24693S64 MS #8-32 · 0.086 in · Flat countersunk · Steel
- MS24693S66 MS #8-32 · 0.086 in · Flat countersunk · Steel
- NAS1102-08-47 NAS #8-32 · 0.086 in · Flat countersunk · Steel
- NAS514P832-40 NAS #8-32 · 0.086 in · Flat countersunk · Steel
- AN507-832R44 AN #8-32 · 0.086 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error