screws › machine screws
AN501A10-7
7/16 Inch Length Fillister Head Machine Screw
Description
7/16 Inch Length Fillister Head Machine Screw
Specifications
| Drilling | Drilled Head |
|---|---|
| Drive Style | Slotted |
| Fastener Length | 0.407 inches minimum and 0.438 inches maximum |
| Head Diameter | 0.292 inches minimum and 0.313 inches maximum |
| Head Height | 0.123 inches minimum and 0.130 inches maximum |
| Head Style | Fillister |
| Head Type | Fillister |
| Industry Standards/Certification | AN501 |
| Internal Drive Style | Slot |
| Length | 7/16 in |
| Material | Steel |
| Min. Tensile Strength (psi) | 60000 pounds per square inch |
| Nondefinitive Specification/Std Data | 1 type and 5s style |
| Screw Material | Steel |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 3 fed spec single treatment response |
| Sold In | Per Package |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.407 inches minimum and 0.438 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10-32 |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN501C10-7 AN #10-32 · 7/16 in · Fillister · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error