screws › machine screws
AN501A10-18
Aeronautical Standard Machine Screw
Description
Fastener Length: 1-1/8", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 1-1/8", AN501 series screw
Specifications
| Fastener Length | Between 1.062 inches and 1.125 inches |
|---|---|
| Head Diameter | Between 0.292 inches and 0.313 inches |
| Head Height | Between 0.123 inches and 0.130 inches |
| Head Hole Configuration Style | Round |
| Head Style | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 1 1/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 60000 pounds per square inch |
| Nondefinitive Specification/Std Data | 1 type and 5s style |
| Screw Material | Steel |
| Screw Surface Treatment | Cadmium |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 1.062 inches and 1.125 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN501AD10-18 AN #10-32 · 0.073 in · Fillister · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error