bolts › close tolerance bolts
AN174H14
Aeronautical Standard Close Tolerance Bolt
Description
Fastener Length: 1-9/16", Hole Diameter: 3/64", Thread: 1/4-28, Thread Length: 33/64
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.984 inches first hole and 1.016 inches first hole |
|---|---|
| Fastener Length | Between 1.515 inches and 1.562 inches |
| Grip Diameter | Between 0.2487 inches and 0.2492 inches |
| Grip Length | Between 1.046 inches and 1.078 inches |
| Hardness Rating | 26.0 rockwell c and 32.0 rockwell c |
| Head Height | Between 0.140 inches and 0.172 inches |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | Between 0.046 inches and 0.056 inches |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches first hole and 0.086 inches first hole |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 type 2 class 3 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.437 inches and 0.516 inches |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 1/4 |
| Width Between Flats | Between 0.428 inches and 0.440 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN174H14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error