bolts › close tolerance bolts
AN174H10
Aeronautical Standard Close Tolerance Bolt
Description
Close Tolerance Bolt
Specifications
| Country of Origin | USA |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.874 inches nominal first hole |
| Fastener Length | 1.015 inches minimum and 1.062 inches maximum |
| Grip Diameter | 0.2487 inches minimum and 0.2492 inches maximum |
| Grip Length | 0.546 inches minimum and 0.578 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.140 inches minimum and 0.172 inches maximum |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Length | 1 1/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches nominal first hole |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty2 cl3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.437 inches minimum and 0.695 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNF |
| Thread Size | 1/4 |
| Weight | 0.05 lb |
| Width Between Flats | 0.428 inches minimum and 0.440 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN174H10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error