bolts › machine bolts
ST3M753L7H30
Bolt
Description
Fastener Length: 2-19/32", Hole Diameter: 3/64", Thread: 7/16-20, Thread Length: 23/32"
Specifications
| Extended Washer Diameter | 0.807 inches minimum and 0.817 inches maximum |
|---|---|
| Extended Washer Thickness | 0.053 inches minimum |
| Fastener Length | 2.565 inches minimum and 2.595 inches maximum |
| Features Provided | Dry film lubricant |
| Grip Diameter | 0.4365 inches minimum and 0.4370 inches maximum |
| Grip Length | 1.865 inches minimum and 1.885 inches maximum |
| Head Height | 0.383 inches minimum and 0.403 inches maximum |
| Head Minor Diameter | 0.514 inches minimum and 0.521 inches maximum |
| Head Style | Spline extended washer |
| Hole Configuration Style | Spline |
| Hole Diameter | 0.050 inches minimum and 0.060 inches maximum |
| Hole Quantity | 4 |
| Hole Type | Drilled |
| Length | 2 19/32 |
| Material | Steel |
| Material Specification | As8879 assn std single material response |
| Min. Tensile Strength (psi) | 220000 pounds per square inch |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Ams2700 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.438 |
| Thread Direction | Right-hand |
| Thread Length | 0.680 inches minimum and 0.730 inches maximum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNJF |
| Thread Size | 7/16 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- ST3M753L7H19
- ST3M753L7H22
- ST3M753L7H25
- ST3M753L7H30
Cross-reference
No interchangeable or dimensionally similar parts are on record for ST3M753L7H30. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error