bolts › machine bolts
ST3M753-5D23
Bolt
Description
Fastener Length: 1-63/64", Thread: 1/4-24, Thread Length: 9/16"
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 1.766 inches minimum first hole and 1.806 inches maximum first hole |
|---|---|
| Extended Washer Diameter | 0.575 inches minimum and 0.585 inches maximum |
| Extended Washer Thickness | 0.035 inches minimum and 0.055 inches maximum |
| Fastener Length | 1.974 inches minimum and 2.004 inches maximum |
| Grip Diameter | 0.3115 inches minimum and 0.3120 inches maximum |
| Grip Length | 1.428 inches minimum and 1.448 inches maximum |
| Head Height | 0.247 inches minimum and 0.287 inches maximum |
| Head Minor Diameter | 0.383 inches minimum and 0.389 inches maximum |
| Head Style | Spline extended washer |
| Length | 1 63/64 |
| Material | Steel |
| Material Specification | Ams 5629 assn std single material response |
| Min. Tensile Strength (psi) | 220000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole and 0.081 inches maximum first hole |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.526 inches minimum and 0.576 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- ST3M753-5D14
- ST3M753-5D23
- ST3M753-5D32
- ST3M753-5D33
Cross-reference
No interchangeable or dimensionally similar parts are on record for ST3M753-5D23. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error