bolts › machine bolts
ST3M735-5-58
Bolt
Description
Fastener Length: 4-7/64", Thread: 1/4-24, Thread Length: 3/8"
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 3.988 inches minimum first hole and 4.018 inches maximum first hole |
|---|---|
| Fastener Length | 4.103 inches minimum and 4.123 inches maximum |
| Grip Diameter | 0.3108 inches minimum and 0.3117 inches maximum |
| Grip Length | 3.625 inches minimum and 3.641 inches maximum |
| Hardness Rating | 36.0 rockwell c minimum and 41.0 rockwell c maximum |
| Head Height | 0.157 inches minimum and 0.172 inches maximum |
| Head Style | Dished hexagon |
| Length | 4 7/64 |
| Material | Steel |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole and 0.086 inches maximum first hole |
| Special Features | Detent ring in shank |
| Specification Data | 76301-st3-735 manufacturers standard |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.311 inches minimum and 0.378 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
| Width Between Flats | 0.492 inches minimum and 0.502 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- ST3M735-5-45
- ST3M735-5-58
Cross-reference
No interchangeable or dimensionally similar parts are on record for ST3M735-5-58. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error