screws › machine screws
ST3M430V4-9AS
Screw
Description
Thread: 1/4-28, Thread Length: 1/2"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 1.015 inches minimum and 1.062 inches maximum |
| Grip Diameter | 0.2490 inches minimum and 0.2495 inches maximum |
| Grip Length | 0.552 inches minimum and 0.572 inches maximum |
| Head Diameter | 0.502 inches minimum and 0.507 inches maximum |
| Head Height | 0.071 inches minimum and 0.073 inches maximum |
| Head Style | Flat countersunk undercut |
| Internal Drive Style | High-torque |
| Length | 1 1/16 |
| Material | Titanium |
| Material Specification | Nas621 comp 6al-4v assn std single material response or ams4928 assn std single material response |
| Special Features | Furnished with one o-ring seal |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.443 inches minimum and 0.510 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- 110179-4-9AS Commercial 1/4-28 · 0.073 in · Flat countersunk undercut · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error