screws › machine screws
S8806-632-5
Screw
Description
Fastener Length: 5/16", Thread: 6-32, Thread Length: 5/16"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.281 inches minimum and 0.312 inches maximum |
| Head Diameter | 0.249 inches minimum and 0.279 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Slot |
| Length | 5/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55 pounds per square inch |
| Screw Material | Steel comp 1010 |
| Screw Material Specification | Qq-s-630 fed spec single material response or qq-s-631 fed spec single material response or qq-s-634 fed spec single material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 3 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | 0.250 inches minimum and 0.312 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 6 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- S8806-632-5
- S8806-632-6
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN507-632-5 AN #6-32 · 5/16 in · Flat countersunk · Steel
- MS24693BB25 MS #6-32 · 5/16 in · Flat countersunk
- MS24693C25 MS #6-32 · 5/16 in · Flat countersunk · Steel
- NAS514P632-5 NAS #6-32 · 5/16 in · Flat countersunk · Steel
- NAS514P632-5B NAS #6-32 · 5/16 in · Flat countersunk · Steel
- NAS514P632-5P NAS #6-32 · 5/16 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error