screws › machine screws
S8805SA4-14
Screw
Description
Fastener Length: 15/16", Hole Diameter: 1/32", Thread: 4-40, Thread Length: 15/16"
Specifications
| Fastener Length | 0.906 inches minimum and 0.938 inches maximum |
|---|---|
| Head Diameter | 0.166 inches minimum and 0.183 inches maximum |
| Head Height | 0.072 inches minimum and 0.079 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Fillister |
| Hole Diameter | 0.037 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 15/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Screw Material | Steel comp 8630 |
| Screw Material Specification | Mil-s-6050 mil spec single material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 2 fed spec single treatment response |
| Special Features | Hole in head located 90 degrees to slot drive |
| Thread Class | 2a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | 0.856 inches minimum and 0.938 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNC |
| Thread Size | 4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- S8805SA4-4
- S8805SA4-14
Cross-reference
No interchangeable or dimensionally similar parts are on record for S8805SA4-14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error